PML mobile logo header
. . .
Cart: $7.95view cart
1-888-PUBLIC-M Contact

Nosecones

"PML offers three styles of mid & high power rocket nosecones; plastic, fiberglass, and solid urethane."

High quality plastinc nosecone
PML Plastic nosecones are precision molded and combine high strength, smoothness and ease of finishing. Our nosecone have a double eyelet design so that you can use one or both eyelets for securing your shock cord(s). While our rockets have been safely flown at Mach + speeds using our stock nosecones, it is recommended to foam fill them using the port in the aft of the cone. Nose weight can be added before foaming, if desired. Lastly, there are 2 sandable ribs on the shoulder for adjusting the fit of your nosecone to the airframe.
High quality fiberglass nosecone
.PML Fiberglass Nosecones are not only strong, light and easy to finish, they also are priced about the same as similar size plastic nosecones, except of course, our 11.41" nose cone which is the largest production nose cone in the industry! Our `glass nosecones are laid-up as one piece in a closed mold and are not 2 pieces glued together like some other nosecones.
Our 7.5" and 11.4" cones have strategically placed carbon fiber reinforcements to increase rigidity while keeping weight to a minimum.
Our `glass nosecones come complete with a pre-drilled 1/2" plywood bulkplate and a 2" U-Bolt set.
Conical urethane nosecone
Urethane Nosecones by PML are conical solid units for high speed, high altitude, minimum diameter rockets.
--- Nosecones ---


Part Number:
make selections

Total:



Intelli-Cone Kits:
The Intelli-Cone is a plastic nose cone specially modified to house a variety of altimeters, data acquisition computers, etc., eliminating the need for bulky conventional payload sections and keeps the weight forward where it's needed most.
Intelli-Cone nosecone with payload bay
•  Nosecone sizes 2.1" & 2.5" use a 38mm payload tube & mounts.
•  Nosecone sizes 3.0" and 3.9" use a 54mm payload tube & mounts.
•  Sled Mounts engineered to fit all Co-Pilot versions or the G-10 Sled Plate.(Co-Pilot not included)
•  Robust yet light-weight fore and aft Sled Mounts.
•  Blank G-10 Sled Plate included for mounting your own electronics and battery.
•  The sled locks into the payload tube with just a few turns of the set screws.
•  Sled Plate, mounts, and payload tube are pre-drilled.
•  All screws and hex wrench included.
•  Pre-installed G-10 centering ring and shock cord attachment cable.

--- Intelli-Cone Kits ---

Part Number:
make selections

Total: